We Owe Iran A Debt Of Gratitude

  • Tiny
  • 01-10-2020, 12:02 PM
Tiny - thank you for a reasoned and factual response to SC and the Axis of socialism.
Unfortunately, he/she exists to post ridiculous non-factual lies designed to stir up conservatives who object to the outright lies, denial. and falsehoods he/she posts.

pointing out the facts will not affect the DPST's - they are not capable of rational thought.
Still - thank you for civil and constructive debate. Originally Posted by oeb11
You know oeb, you can respect, for example, George DRIII and Champagne Brown's arguments in this thread. Although you can poke holes in their arguments, they use facts to support their case. Sistine Chapel on the other hand just makes stuff up.
  • Tiny
  • 01-10-2020, 12:22 PM
Ok maybe you didn't listen to retired General Wesley Clark admit about the US government's "7 Country hit list". I've been to Somalia in 1993. A quagmire of tribal warfare. No threat to the US.

I've been to Afghanistan and Iraq twice each. No threat to the US.
But me and my battle buddies pounded the crap out of these countries.

What people don't know about Afghanistan is the trillion dollar Lithium vane and the mineral rich mountains there.

What everbody does know about is one of the largest untapped oilfields (Rumallah oilfield) in Iraq.

Somalia's strategic location to the Red Sea and the Suez Canal as it's located on the Horn of Africa with it's major shipping lanes.

Again CNN posted General Clark's remarks about the 7 country hit list. The companies in the US are some of the biggest arms dealers on the planet, which results in more deaths than any one man can imagine. Russia and China are also just as big in arms sales.

I tell you what it's all about, he who controls the natural resources and money everywhere controls the world.

I believe in the people of the US but certainly not my government who has failed me time after time after i retired from the Army with 22 years of service.

I'll let people know "If you haven't been to any of those countries and had to deal with the people of those countries face to face, don't say shit to me." In order for you to know you have to go.

Oh and for those of you who didn't know a fact out of Somalia--Mohammed Farrah Aidid's son served in the USMC. Aidid was an enemy of ours over there. He died of wounds. Once his son finished his obligation to the USMC, he went back to Somalia to try and unite the broken government. Originally Posted by GeorgeDRII
We're probably on the same page in how we think the USA should conduct foreign policy and defense in the Middle East. However, we've got some major differences in the way we look at the situation.

I'd argue the big reasons we're there are,

1. Paranoia about Middle East terrorists. Many of our politicians and fellow citizens historically believed if we weren't willing to spill the blood of our servicemen and spend trillions of taxpayer dollars, there would be a lot more bloodshed in the USA

2. The Neoconservatives had a utopian vision of bringing Democracy to the Middle East, and Iraq was their playground. They persuaded Bush to invade, by using "evidence" for weapons of mass destruction that didn't exist. Although perhaps Bush was too anxious to proceed with war anyway, to finish what his father started.

3. The 9/11 deaths were the reason we went into Afghanistan.

I don't believe lithium deposits in Afghanistan have anything to do with why we were there, and the Rumallah Oilfield was pretty far down the list.

Certainly though backing up the Saudi's, Kuwaitis and United Arab Emirates because of their huge oil reserves played a part. Now though we don't have a huge vested interest in protecting the Middle East oilfields, because we're an energy exporter. This is something though that could change overnight though if one of the Democratic candidates for president is able to implement policies they've announced, to shut down the USA oil and gas industry.

As to helping the defense industry, I believe you overstate the case. Yes, the support of Trump and some Congressmen for the Saudi's is based in part on their purchases of U.S. arms. But the Department of Defense and others aren't on this bandwagon.

And Somalia, you undoubtedly know the situation there much better then I do. I'd argue we haven't made a huge commitment to Somalia, in terms of our military, and it's not nearly as big a problem as other things we've been up against in the Middle East.

So yeah, like you I think, I'd rather not see us there, although I don't think the reasons we are there are primarily economic. The trillions we've spent on Iraq and Afghanistan far outweigh any benefits that would come back to us through sales of arms and profits for U.S. companies from resources like oil and lithium.
GeorgeDRII's Avatar
When i was in Afghanistan fighting taliban on mount Beghshan we saw in the caves the lithium and other materials you could actually pull from the cave walls.

The Chinese geologists were digging on one side of the mountain when we where fighting on the other side. I remember my Battalion Commander saying to me, this is our true gold mine over here.

9/11 well that was just a false flag incident. I was a demolitions expert on my team. We were taught to blow structural supports at an angle so the structure would slide off and collapse under it's failed weight support.

If you looked closely at the inner structure of the WTC at the collapse site you would see many of the metal structures cut at an angle as if sliced by wire explosives. The metal was melted in to pools at the base.

JP-8 (jet fuel) does not burn hot enough to melt metal. The WTC towers were made to withstand a direct impact of a plane. So the burning fuel was still not hot enough to melt the structural support. Mainly because of the height of the towers and the aircraft flowing around the city the towers were built strong enough to support such a catastrophe.

Clinton mentioned in a speech back when he was president, when the WTC towers come down and a terrorist bomb explodes at the Pentagon. Crazy as it sounds all footage from cameras outside the Pentagon were taken by FBI agents. A young NCO working in the area where the Pentagon was "hit" crawled out of the rubble and she happened to have her baby with her that day. She stated she noticed no plane wreckage.

See false flag incidents. Much like the weapins of mass destruction. Our government trying to install it's own ideologies in countries that pretty much existed a thousand yeas before we did. Ideologies so we can control what they have.

Nixon even said in a speech that Saudi Arabia needed Americans there.

Look back in history at "Manifest Destiny"
Champagne Brown's Avatar
When i was in Afghanistan fighting taliban on mount Beghshan we saw in the caves the lithium and other materials you could actually pull from the cave walls.

The Chinese geologists were digging on one side of the mountain when we where fighting on the other side. I remember my Battalion Commander saying to me, this is our true gold mine over here.

9/11 well that was just a false flag incident. I was a demolitions expert on my team. We were taught to blow structural supports at an angle so the structure would slide off and collapse under it's failed weight support.

If you looked closely at the inner structure of the WTC at the collapse site you would see many of the metal structures cut at an angle as if sliced by wire explosives. The metal was melted in to pools at the base.

JP-8 (jet fuel) does not burn hot enough to melt metal. The WTC towers were made to withstand a direct impact of a plane. So the burning fuel was still not hot enough to melt the structural support. Mainly because of the height of the towers and the aircraft flowing around the city the towers were built strong enough to support such a catastrophe.

Clinton mentioned in a speech back when he was president, when the WTC towers come down and a terrorist bomb explodes at the Pentagon. Crazy as it sounds all footage from cameras outside the Pentagon were taken by FBI agents. A young NCO working in the area where the Pentagon was "hit" crawled out of the rubble and she happened to have her baby with her that day. She stated she noticed no plane wreckage.

See false flag incidents. Much like the weapins of mass destruction. Our government trying to install it's own ideologies in countries that pretty much existed a thousand yeas before we did. Ideologies so we can control what they have.

Nixon even said in a speech that Saudi Arabia needed Americans there.

Look back in history at "Manifest Destiny" Originally Posted by GeorgeDRII


  • oeb11
  • 01-10-2020, 02:44 PM
Originally posted by GeorgeDRll
9/11 well that was just a false flag incident. I was a demolitions expert on my team. We were taught to blow structural supports at an angle so the structure would slide off and collapse under it's failed weight support.

If you looked closely at the inner structure of the WTC at the collapse site you would see many of the metal structures cut at an angle as if sliced by wire explosives. The metal was melted in to pools at the base.

JP-8 (jet fuel) does not burn hot enough to melt metal. The WTC towers were made to withstand a direct impact of a plane. So the burning fuel was still not hot enough to melt the structural support. Mainly because of the height of the towers and the aircraft flowing around the city the towers were built strong enough to support such a catastrophe.


For George, Champagne, and Tiny



Please see the referenced article copied below.
There is factual reality in the post made quoted above - but it is a very superficial analysis of the factors that caused the WTC tower collapse


Jet fuel is a type of kerosene, and : Jet fuel burns at 800° to 1500°F, not hot enough to melt steel (2750°F). However, experts agree that for the towers to collapse, their steel frames didn't need to melt, they just had to lose some of their structural strength—and that required exposure to much less heat.


There is a difference in the concepts of temperature v heat - see article below. It is factual that the burning temperature of kerosene is not hot enough to melt steel - but that is not the operative reason for the WTC tower's failure. The heat destabilized the angle clips supporting the floor joists - which then collapsed.

The structure was engineered for great stresses - as seen that both towers resisted the impact of airliners. What they could not resist was the load of burning jet fuel and office combustibles which destabilized the structures


If george believes the WTC towers were brought down by "Wire Explosives' - please reply with a detailed scientific justification.

There are almost as many cockamamie conspiracy theories about the WTC towers as JFK's assassination.

BTW - the 6th floor Museum in dallas is a very good visit with a great deal of historical import.



Why Did the World Trade Center Collapse? Science, Engineering, and Speculation

Thomas W. Eagar and Christopher Musso

Editor’s Note: For a more complete. updated analysis of the World Trade Center towers collapse, read “The Role of Metallurgy in the NIST Investigation of the World Trade Center Towers Collapse” in the December 2007 issue.
OTHER ARTICLES IN THE WTC SERIES Why Did the World Trade Center Collapse? Science, Engineering, and Speculation by Thomas Eagar and Christopher Musso
Better Materials Can Reduce the Threat from Terrorism by Toni G. Maréchaux
An Initial Microstructural Analysis of A36 Steel from WTC Building 7 by J.R. Barnett, R.R. Biederman, and R.D. Sisson, Jr.
News & Update
There have been numerous reports detailing the cause of the World Trade Center Tower collapse on September 11, 2001. Most have provided qualitative explanations; however, simple quantitative analyses show that some common conclusions are incorrect; for example, the steel could not melt in these flames and there was more structural damage than merely softening of the steel at elevated temperatures. Some guidelines for improvements in future structures are presented.
INTRODUCTION

The collapse of the World Trade Center (WTC) towers on September 11, 2001, was as sudden as it was dramatic; the complete destruction of such massive buildings shocked nearly everyone. Immediately afterward and even today, there is widespread speculation that the buildings were structurally deficient, that the steel columns melted, or that the fire suppression equipment failed to operate. In order to separate the fact from the fiction, we have attempted to quantify various details of the collapse.

The major events include the following:
  • The airplane impact with damage to the columns.
  • The ensuing fire with loss of steel strength and distortion (Figure 1).
  • The collapse, which generally occurred inward without significant tipping (Figure 2).
Each will be discussed separately, but initially it is useful to review the overall design of the towers.
THE DESIGN

The towers were designed and built in the mid-1960s through the early 1970s. They represented a new approach to skyscrapers in that they were to be very lightweight and involved modular construction methods in order to accelerate the schedule and to reduce the costs.

To a structural engineer, a skyscraper is modeled as a large cantilever vertical column. Each tower was 64 m square, standing 411 m above street level and 21 m below grade. This produces a height-to-width ratio of 6.8. The total weight of the structure was roughly 500,000 t, but wind load, rather than the gravity load, dominated the design. The building is a huge sail that must resist a 225 km/h hurricane. It was designed to resist a wind load of 2 kPa—a total of lateral load of 5,000 t.

In order to make each tower capable of withstanding this wind load, the architects selected a lightweight “perimeter tube” design consisting of 244 exterior columns of 36 cm square steel box section on 100 cm centers (see Figure 3). This permitted windows more than one-half meter wide. Inside this outer tube there was a 27 m × 40 m core, which was designed to support the weight of the tower. It also housed the elevators, the stairwells, and the mechanical risers and utilities. Web joists 80 cm tall connected the core to the perimeter at each story. Concrete slabs were poured over these joists to form the floors. In essence, the building is an egg-crate construction that is about 95 percent air, explaining why the rubble after the collapse was only a few stories high.
Figure 1. Flames and debris exploded from the World Trade Center south tower immediately after the airplane’s impact. The black smoke indicates a fuel-rich fire (Getty Images). Figure 2. As the heat of the fire intensified, the joints on the most severely burned floors gave way, causing the perimeter wall columns to bow outward and the floors above them to fall. The buildings collapsed within ten seconds, hitting bottom with an estimated speed of 200 km/h (Getty Images).
The egg-crate construction made a redundant structure (i.e., if one or two columns were lost, the loads would shift into adjacent columns and the building would remain standing). Prior to the World Trade Center with its lightweight perimeter tube design, most tall buildings contained huge columns on 5 m centers and contained massive amounts of masonry carrying some of the structural load. The WTC was primarily a lightweight steel structure; however, its 244 perimeter columns made it “one of the most redundant and one of the most resilient” skyscrapers.1
THE AIRLINE IMPACT

The early news reports noted how well the towers withstood the initial impact of the aircraft; however, when one recognizes that the buildings had more than 1,000 times the mass of the aircraft and had been designed to resist steady wind loads of 30 times the weight of the aircraft, this ability to withstand the initial impact is hardly surprising. Furthermore, since there was no significant wind on September 11, the outer perimeter columns were only stressed before the impact to around 1/3 of their 200 MPa design allowable.

The only individual metal component of the aircraft that is comparable in strength to the box perimeter columns of the WTC is the keel beam at the bottom of the aircraft fuselage. While the aircraft impact undoubtedly destroyed several columns in the WTC perimeter wall, the number of columns lost on the initial impact was not large and the loads were shifted to remaining columns in this highly redundant structure. Of equal or even greater significance during this initial impact was the explosion when 90,000 L gallons of jet fuel, comprising nearly 1/3 of the aircraft’s weight, ignited. The ensuing fire was clearly the principal cause of the collapse (Figure 4).
THE FIRE

The fire is the most misunderstood part of the WTC collapse. Even today, the media report (and many scientists believe) that the steel melted. It is argued that the jet fuel burns very hot, especially with so much fuel present. This is not true.

Part of the problem is that people (including engineers) often confuse temperature and heat. While they are related, they are not the same. Thermodynamically, the heat contained in a material is related to the temperature through the heat capacity and the density (or mass). Temperature is defined as an intensive property, meaning that it does not vary with the quantity of material, while the heat is an extensive property, which does vary with the amount of material. One way to distinguish the two is to note that if a second log is added to the fireplace, the temperature does not double; it stays roughly the same, but the size of the fire or the length of time the fire burns, or a combination of the two, doubles. Thus, the fact that there were 90,000 L of jet fuel on a few floors of the WTC does not mean that this was an unusually hot fire. The temperature of the fire at the WTC was not unusual, and it was most definitely not capable of melting steel.

In combustion science, there are three basic types of flames, namely, a jet burner, a pre-mixed flame, and a diffuse flame. A jet burner generally involves mixing the fuel and the oxidant in nearly stoichiometric proportions and igniting the mixture in a constant-volume chamber. Since the combustion products cannot expand in the constant-volume chamber, they exit the chamber as a very high velocity, fully combusted, jet. This is what occurs in a jet engine, and this is the flame type that generates the most intense heat.

In a pre-mixed flame, the same nearly stoichiometric mixture is ignited as it exits a nozzle, under constant pressure conditions. It does not attain the flame velocities of a jet burner. An oxyacetylene torch or a Bunsen burner is a pre-mixed flame.

In a diffuse flame, the fuel and the oxidant are not mixed before ignition, but flow together in an uncontrolled manner and combust when the fuel/oxidant ratios reach values within the flammable range. A fireplace flame is a diffuse flame burning in air, as was the WTC fire.

Diffuse flames generate the lowest heat intensities of the three flame types.

If the fuel and the oxidant start at ambient temperature, a maximum flame temperature can be defined. For carbon burning in pure oxygen, the maximum is 3,200°C; for hydrogen it is 2,750°C. Thus, for virtually any hydrocarbons, the maximum flame temperature, starting at ambient temperature and using pure oxygen, is approximately 3,000°C.

This maximum flame temperature is reduced by two-thirds if air is used rather than pure oxygen. The reason is that every molecule of oxygen releases the heat of formation of a molecule of carbon monoxide and a molecule of water. If pure oxygen is used, this heat only needs to heat two molecules (carbon monoxide and water), while with air, these two molecules must be heated plus four molecules of nitrogen. Thus, burning hydrocarbons in air produces only one-third the temperature increase as burning in pure oxygen because three times as many molecules must be heated when air is used. The maximum flame temperature increase for burning hydrocarbons (jet fuel) in air is, thus, about 1,000°C—hardly sufficient to melt steel at 1,500°C.
Figure 3. A cutaway view of WTC structure. Figure 4. A graphic illustration, from the USA Today newspaper web site, of the World Trade Center points of impact. Click on the image above to access the actual USA Today feature.
But it is very difficult to reach this maximum temperature with a diffuse flame. There is nothing to ensure that the fuel and air in a diffuse flame are mixed in the best ratio. Typically, diffuse flames are fuel rich, meaning that the excess fuel molecules, which are unburned, must also be heated. It is known that most diffuse fires are fuel rich because blowing on a campfire or using a blacksmith’s bellows increases the rate of combustion by adding more oxygen. This fuel-rich diffuse flame can drop the temperature by up to a factor of two again. This is why the temperatures in a residential fire are usually in the 500°C to 650°C range.2,3 It is known that the WTC fire was a fuel-rich, diffuse flame as evidenced by the copious black smoke. Soot is generated by incompletely burned fuel; hence, the WTC fire was fuel rich—hardly surprising with 90,000 L of jet fuel available. Factors such as flame volume and quantity of soot decrease the radiative heat loss in the fire, moving the temperature closer to the maximum of 1,000°C. However, it is highly unlikely that the steel at the WTC experienced temperatures above the 750–800°C range. All reports that the steel melted at 1,500°C are using imprecise terminology at best.

Some reports suggest that the aluminum from the aircraft ignited, creating very high temperatures. While it is possible to ignite aluminum under special conditions, such conditions are not commonly attained in a hydrocarbon-based diffuse flame. In addition, the flame would be white hot, like a giant sparkler. There was no evidence of such aluminum ignition, which would have been visible even through the dense soot.

It is known that structural steel begins to soften around 425°C and loses about half of its strength at 650°C.4 This is why steel is stress relieved in this temperature range. But even a 50% loss of strength is still insufficient, by itself, to explain the WTC collapse. It was noted above that the wind load controlled the design allowables. The WTC, on this low-wind day, was likely not stressed more than a third of the design allowable, which is roughly one-fifth of the yield strength of the steel. Even with its strength halved, the steel could still support two to three times the stresses imposed by a 650°C fire.

The additional problem was distortion of the steel in the fire. The temperature of the fire was not uniform everywhere, and the temperature on the outside of the box columns was clearly lower than on the side facing the fire. The temperature along the 18 m long joists was certainly not uniform. Given the thermal expansion of steel, a 150°C temperature difference from one location to another will produce yield-level residual stresses. This produced distortions in the slender structural steel, which resulted in buckling failures. Thus, the failure of the steel was due to two factors: loss of strength due to the temperature of the fire, and loss of structural integrity due to distortion of the steel from the non-uniform temperatures in the fire.
THE COLLAPSE

Nearly every large building has a redundant design that allows for loss of one primary structural member, such as a column. However, when multiple members fail, the shifting loads eventually overstress the adjacent members and the collapse occurs like a row of dominoes falling down.

The perimeter tube design of the WTC was highly redundant. It survived the loss of several exterior columns due to aircraft impact, but the ensuing fire led to other steel failures. Many structural engineers believe that the weak points—the limiting factors on design allowables—were the angle clips that held the floor joists between the columns on the perimeter wall and the core structure (see Figure 5). With a 700 Pa floor design allowable, each floor should have been able to support approximately 1,300 t beyond its own weight. The total weight of each tower was about 500,000 t.

As the joists on one or two of the most heavily burned floors gave way and the outer box columns began to bow outward, the floors above them also fell. The floor below (with its 1,300 t design capacity) could not support the roughly 45,000 t of ten floors (or more) above crashing down on these angle clips. This started the domino effect that caused the buildings to collapse within ten seconds, hitting bottom with an estimated speed of 200 km per hour. If it had been free fall, with no restraint, the collapse would have only taken eight seconds and would have impacted at 300 km/h.1 It has been suggested that it was fortunate that the WTC did not tip over onto other buildings surrounding the area. There are several points that should be made. First, the building is not solid; it is 95 percent air and, hence, can implode onto itself. Second, there is no lateral load, even the impact of a speeding aircraft, which is sufficient to move the center of gravity one hundred feet to the side such that it is not within the base footprint of the structure. Third, given the near free-fall collapse, there was insufficient time for portions to attain significant lateral velocity. To summarize all of these points, a 500,000 t structure has too much inertia to fall in any direction other than nearly straight down.
Figure 5. Unscaled schematic of WTC floor joints and attachment to columns. WAS THE WTC DEFECTIVELY DESIGNED?

The World Trade Center was not defectively designed. No designer of the WTC anticipated, nor should have anticipated, a 90,000 L Molotov cocktail on one of the building floors. Skyscrapers are designed to support themselves for three hours in a fire even if the sprinkler system fails to operate. This time should be long enough to evacuate the occupants. The WTC towers lasted for one to two hours—less than the design life, but only because the fire fuel load was so large. No normal office fires would fill 4,000 square meters of floor space in the seconds in which the WTC fire developed. Usually, the fire would take up to an hour to spread so uniformly across the width and breadth of the building. This was a very large and rapidly progressing fire (very high heat but not unusually high temperature). Further information about the design of the WTC can be found on the World Wide Web.5–8
WHERE DO WE GO FROM HERE

The clean-up of the World Trade Center will take many months. After all, 1,000,000 t of rubble will require 20,000 to 30,000 truckloads to haul away the material. The asbestos fire insulation makes the task hazardous for those working nearby. Interestingly, the approximately 300,000 t of steel is fully recyclable and represents only one day’s production of the U.S. steel industry. Separation of the stone and concrete is a common matter for modern steel shredders. The land-filling of 700,000 t of concrete and stone rubble is more problematic. However, the volume is equivalent to six football fields, 6–9 m deep, so it is manageable.

There will undoubtedly be a number of changes in the building codes as a result of the WTC catastrophe. For example, emergency communication systems need to be upgraded to speed up the notice for evacuation and the safest paths of egress. Emergency illumination systems, separate from the normal building lighting, are already on the drawing boards as a result of lessons learned from the WTC bombing in 1993. There will certainly be better fire protection of structural members. Protection from smoke inhalation, energy-absorbing materials, and redundant means of egress will all be considered.

A basic engineering assessment of the design of the World Trade Center dispels many of the myths about its collapse. First, the perimeter tube design of the towers protected them from failing upon impact. The outer columns were engineered to stiffen the towers in heavy wind, and they protected the inner core, which held the gravity load. Removal of some of the outer columns alone could not bring the building down. Furthermore, because of the stiffness of the perimeter design, it was impossible for the aircraft impact to topple the building.

However, the building was not able to withstand the intense heat of the jet fuel fire. While it was impossible for the fuel-rich, diffuse-flame fire to burn at a temperature high enough to melt the steel, its quick ignition and intense heat caused the steel to lose at least half its strength and to deform, causing buckling or crippling. This weakening and deformation caused a few floors to fall, while the weight of the stories above them crushed the floors below, initiating a domino collapse.

It would be impractical to design buildings to withstand the fuel load induced by a burning commercial airliner. Instead of saving the building, engineers and officials should focus on saving the lives of those inside by designing better safety and evacuation systems.

As scientists and engineers, we must not succumb to speculative thinking when a tragedy such as this occurs. Quantitative reasoning can help sort fact from fiction, and can help us learn from this unfortunate disaster. As Lord Kelvin said,
“I often say . . . that when you can measure what you are speaking about, and express it in numbers, you know something about it; but when you cannot measure it, when you cannot express it in numbers, your knowledge is of a meager and unsatisfactory kind; it may be the beginning of knowledge, but you have scarcely, in your thoughts, advanced to the stage of science, whatever the matter may be.”
We will move forward from the WTC tragedy and we will engineer better and safer buildings in the future based, in part, on the lessons learned at the WTC. The reason the WTC collapse stirs our emotions so deeply is because it was an intentional attack on innocent people. It is easier to accept natural or unintentional tragedies; it is the intentional loss of life that makes us fear that some people have lost their humanity.
References
1. Presentation on WTC Collapse, Civil Engineering Department, MIT, Cambridge, MA (October 3, 2001).
2. D. Drysdale, An Introduction to Fire Dynamics (New York: Wiley Interscience, 1985), pp. 134–140.
3. A.E. Cote, ed., Fire Protection Handbook 17th Edition (Quincy, MA: National Fire Protection Association, 1992), pp. 10–67.
4. A.E. Cote, ed., Fire Protection Handbook 17th Edition (Quincy, MA: National Fire Protection Association, 1992), pp. 6-62 to 6-70.
5. Steven Ashley, “When the Twin Towers Fell,” Scientific American Online (October 9, 2001); www.sciam.com/explorations/2001/100901wtc/
6. Zdenek P. Bazant and Yong Zhou, “Why Did the World Trade Center Collapse?—Simple Analysis,” J. Engineering Mechanics ASCE, (September 28, 2001), also www.tam.uiuc.edu/news/200109wtc/
7. Timothy Wilkinson, “World Trade Centre–New York—Some Engineering Aspects” (October 25, 2001), Univ. Sydney, Department of Civil Engineering; www.civil.usyd.edu.au/wtc.htm.
8. G. Charles Clifton, “Collapse of the World Trade Centers,” CAD Headlines, tenlinks.com (October 8, 2001); www.tenlinks.com/NEWS/special/wtc/clifton/p1.htm.
Thomas W. Eagar, the Thomas Lord Professor of Materials Engineering and Engineering Systems, and Christopher Musso, graduate research student, are at the Massachusetts Institute of Technology.
For more information, contact T.W. Eagar, MIT, 77 Massachusetts Avenue, Room 4-136, Cambridge, Massachusetts 02139-4301; (617) 253-3229; fax (617) 252-1773; e-mail tweagar@mit.edu.
Copyright held by The Minerals, Metals & Materials Society, 2001

To those brave souls who have read this post - I say "Bravo"!
GeorgeDRII's Avatar
A perfect shape charge to cut through the steel girders would be Dioplex 30mm. Heck you can see how it works on youtube if you like. Go to you tube and type in Dioplex 30mm. You'll also see other film shorts such as Marines learning to use explosives. By the way, that's how quite a few of us learned the techniques of explosives was while we where deployed to contingency operations around the world. Especially us Airborne personnel. We were the easiest to transport and "Drop off" Pardon my expression.
Annalise2020's Avatar
I love the fact that people care so much!... Hey this is a friend who used to be on here... Miranda with an S.
  • Tiny
  • 01-10-2020, 03:10 PM
There is a difference in the concepts of temperature v heat - see article below. It is factual that the burning temperature of kerosene is not hot enough to melt steel - but that is not the operative reason for the WTC tower's failure. The heat destabilized the angle clips supporting the floor joists - which then collapsed. Originally Posted by oeb11
Oeb, Kudos for going to the Minerals, Metals & Materials Society's journal to find answers. In addition to the angle clips, I thought the following was enlightening,

"However, the building was not able to withstand the intense heat of the jet fuel fire. While it was impossible for the fuel-rich, diffuse-flame fire to burn at a temperature high enough to melt the steel, its quick ignition and intense heat caused the steel to lose at least half its strength and to deform, causing buckling or crippling. This weakening and deformation caused a few floors to fall, while the weight of the stories above them crushed the floors below, initiating a domino collapse."
  • oeb11
  • 01-10-2020, 03:47 PM
A perfect shape charge to cut through the steel girders would be Dioplex 30mm. Heck you can see how it works on youtube if you like. Go to you tube and type in Dioplex 30mm. You'll also see other film shorts such as Marines learning to use explosives. By the way, that's how quite a few of us learned the techniques of explosives was while we where deployed to contingency operations around the world. Especially us Airborne personnel. We were the easiest to transport and "Drop off" Pardon my expression. Originally Posted by GeorgeDRII

is George advocating that pre-placed shaped charges caused the collapse????
I do not doubt George's expertise in military matters - but that dos not translate to a what seems to be advocating a "conspiracy theory" of the WTC towers destruction. ??

Take a moment(s) to read my post, George. And clarify your meaning.
  • oeb11
  • 01-10-2020, 03:48 PM
Oeb, Kudos for going to the Minerals, Metals & Materials Society's journal to find answers. In addition to the angle clips, I thought the following was enlightening,

"However, the building was not able to withstand the intense heat of the jet fuel fire. While it was impossible for the fuel-rich, diffuse-flame fire to burn at a temperature high enough to melt the steel, its quick ignition and intense heat caused the steel to lose at least half its strength and to deform, causing buckling or crippling. This weakening and deformation caused a few floors to fall, while the weight of the stories above them crushed the floors below, initiating a domino collapse." Originally Posted by Tiny

Thank You, good Sir!
GeorgeDRII's Avatar
Let's not forget about the WTC bombing in 1993 that took place first. In Tower 1 that killed 6 and injured 1042.

It was during Clinton's time as president that this happened. As conspiracy theory has it, an FBI agant controlled the team who placed the truck with explosives in the basement.

The agent asked his supervisor if it was a drill. The supervisor told him it was not a drill it was the real thing.

Remember...General Clark admitting to the 7 country hit list. The government had to come up with reasons to attack those countries.

Knowing Congress would never allow declaring war on any nation without the best reason for us to attack i.e. hostile actions against us with the loss of American lives in a direct attack on us.

The were no weapons of mass destruction found anywhere in Iraq. Sure we got rid of a Tyrrant. But he was by no means any threat to our well being here stateside.

The sanctions had crippled his ability severly to be any threat to us at all.

Let's take a look at Osama Bin Laden. His family of royal Saudis were here the day of the 9/11 incident. The FAA grounded all flights in and out of the country. They were here purchasing weapons for protection of Saudi Arabia. Oddly enough Jeb Bush flew them out the next day. Even though the FAA still had all flights grounded in and out.

British Broadcast Channel was saying a third tower had collapsed. That was tower 7. However in the background of their live feed tower 7 was still standing. Also the paper trail of the 26 billion dollars that was missing in government misspendings was located in that building. Rumsfield announced that missing money. The paperwork just so happened to be in building 7. When it collapsed it collapsed inward so that the rubble wouldn't be strewn across the roads.

I smell a rat.

Flight 93 didn't crash. The plane landed in Cincinnati Ohio and was whisked into a hanger. Even the mayor of Cincinnati wasn't allowed to go to that hanger? Odd. The airport is part of his responsibility as it is in his city. Especially when there was an emergency landing at the airport in his city.

To much mixed information that day. Especially when flight 93 passed over Fort Dix in New Jersey where the FAA has dead space where they can't track any flights.

False flag incidents happen so that the President or our government can come up with ways to start fights around the globe.

Captain MacNamera admitted his boats were just fine in the Gulf of Tonkin (North Vietnam). Even though the President said "Our boys are floundering in the water over there."

Check out former Governor Ventura's past show Off The Grid. He was a Navy SEAL in Nam. He was over there so you know for sure he saw the bullshit going on.
GeorgeDRII's Avatar
  • oeb11
  • 01-10-2020, 04:56 PM
Let's not forget about the WTC bombing in 1993 that took place first. In Tower 1 that killed 6 and injured 1042.

It was during Clinton's time as president that this happened. As conspiracy theory has it, an FBI agant controlled the team who placed the truck with explosives in the basement.

The agent asked his supervisor if it was a drill. The supervisor told him it was not a drill it was the real thing.

Remember...General Clark admitting to the 7 country hit list. The government had to come up with reasons to attack those countries.

Knowing Congress would never allow declaring war on any nation without the best reason for us to attack i.e. hostile actions against us with the loss of American lives in a direct attack on us.

The were no weapons of mass destruction found anywhere in Iraq. Sure we got rid of a Tyrrant. But he was by no means any threat to our well being here stateside.

The sanctions had crippled his ability severly to be any threat to us at all.

Let's take a look at Osama Bin Laden. His family of royal Saudis were here the day of the 9/11 incident. The FAA grounded all flights in and out of the country. They were here purchasing weapons for protection of Saudi Arabia. Oddly enough Jeb Bush flew them out the next day. Even though the FAA still had all flights grounded in and out.

British Broadcast Channel was saying a third tower had collapsed. That was tower 7. However in the background of their live feed tower 7 was still standing. Also the paper trail of the 26 billion dollars that was missing in government misspendings was located in that building. Rumsfield announced that missing money. The paperwork just so happened to be in building 7. When it collapsed it collapsed inward so that the rubble wouldn't be strewn across the roads.

I smell a rat.

Flight 93 didn't crash. The plane landed in Cincinnati Ohio and was whisked into a hanger. Even the mayor of Cincinnati wasn't allowed to go to that hanger? Odd. The airport is part of his responsibility as it is in his city. Especially when there was an emergency landing at the airport in his city.

To much mixed information that day. Especially when flight 93 passed over Fort Dix in New Jersey where the FAA has dead space where they can't track any flights.

False flag incidents happen so that the President or our government can come up with ways to start fights around the globe.

Captain MacNamera admitted his boats were just fine in the Gulf of Tonkin (North Vietnam). Even though the President said "Our boys are floundering in the water over there."

Check out former Governor Ventura's past show Off The Grid. He was a Navy SEAL in Nam. He was over there so you know for sure he saw the bullshit going on.


Okay.....
Thank you, georgedr2
please consider the Comedy Central Forum.